The Trains Of Eagle Lake And The Allagash Wilderness



You are walking in the woods and suddenly, there in a clearing are two locomotives, rusted and aging but trains all the same.

This is the case in northern Maine in the Allagash wilderness, once one of the top foresting areas in the country. Trains were once used to haul all of the timber out of the forest farther southward to be shipped to far places. It was a very lucrative business. Thanks to The Department Of Conservations Of Maine website they put together a amazing historical narrative of the trains.

“There are not a lot of places in the world where you can be hiking through a remote wilderness and suddenly stumble upon rusting locomotives. One of the things that makes the Allagash so fascinating is the possibility of a sudden discovery of remnants from a bygone lumbering industry. For example, you could be walking through the wild forests of northern Maine and then suddenly you’re staring down the nose of two steam locomotives.

For those lumbering operations still driving logs south from Eagle and Churchill Lakes to Penobscot waters, the Eagle Lake and West Branch Railroad replaced the Tramway. In 1926 this railroad ran from the Eagle Lake end of the tramway thirteen miles to Umbazooksus Lake, which connects to the West Branch of the Penobscot River via Chesuncook Lake. Edouard “King” Lacroix’s Madawaska Company purchased a ninety-ton steam locomotive in New York and converted it from coal to oil burning for this operation. To haul the large supply of oil needed for the train, the company leased a Plymouth gasoline engine from Great Northern Paper. The oil was brought in barrels by truck from Greenville to Chesuncook Dam. From there, a scow would carry the barrels to the terminal end of the railroad on Umbazooksus Lake.

During the winter of 1926-27, Lombard tractors hauled all of the materials for the railroad from Lac Frontiere to Churchill Depot, then across Churchill Lake to the shore of Eagle Lake. This included the fifteen hundred foot trestle for Allagash Stream, steel rails, loaders, two gas-powered switchers, sixty train cars, and the two one hundred ton locomotives. King Lacroix, however, never got the railroad into operation because the Great Northern Paper Company bought his operation early in 1927. On June 1, 1927, the railroad made its first successful trip as the Eagle Lake and West Branch Railroad.

To load the train cars on the Eagle Lake end of the line, logs were drawn along two conveyors that raised them up twenty-five feet over a two hundred twenty-five foot length. With a forty-horse power diesel engine powering each conveyor, a cord of wood could move from lake to car in just ninety seconds. Each twelve-cord car could be filled in eighteen minutes. Operators soon discovered that the time it took to neatly pile the logs into the cars horizontally made the practice inefficient, so they resorted to just dumping them in as they fell from the conveyors. The cars were built with a twelve-inch tilt in them so that when they drove out onto the unloading trestle at the Umbazooksus end (where the tracks were tilted six more inches) an operator could knock loose the pins holding back the car wall hinged at the top and most of the load would tumble out into the water. A little picking and prodding of the remaining logs and the train was on its way back for another load.

Since the round trip over the curvy road made a single-train operation too slow and inefficient, the company used two trains of ten cars each, with a passing track in the middle so the empty car on its return route could pass the full car headed in the other direction. The trains of twelve cars each ran on the road both day and night stopping only ten minutes to service the steam engine. While this happened, the Plymouth engine pushed a set of loaded cars away from the conveyors where the locomotive could hook up to it. The Plymouth then took the empty cars, just back from their run, and pushed them under the conveyors for loading. This system, along with the addition of an electric lighting system for loading the cars and storage towers to allow faster refilling of the trains’ water and oil, increased the log-hauling capacity four hundred percent. In an average week, more than six thousand five hundred cords of wood moved across the tracks.

The Plymouth engines at each end of the train route shifted empty cars around the yard while the locomotives refueled. Logs could not float away when too much bark gathered near the unloading trestle, so engineers designed a special scraper that was attached to the Plymouth by means of a pulley and anchor and this system scraped the bark out of the way. The railroad crossed over the northwest arm of Chamberlain Lake where it reaches toward Allagash Lake.

The most significant structure of this operation was the fifteen hundred foot long railroad trestle sturdy enough to carry both the train and its regular supply of heavy log cargo across this piece of water. Only a few remains of the trestle are still visible.

Aerial photographs from 1966 show that only one structure, the shed built over the locomotives, remained at the railroad site on the Eagle Lake end of the tramway when the Allagash Wilderness Waterway was created. While still owned by the Seven Islands Land Company on April 9, 1969, the Maine Forest Service mistakenly burned the shed, causing damage to some of the wooden elements of the locomotives (i.e. the wooden cab).  Both locomotives have also suffered from vandalism and souvenir hunters. Photos show the burned area on June 11, 1969


On August 16, 1969, the Maine Parks and Recreation Commission painted the trains to prevent further rusting.  In 1995, the boiler jackets on both locomotives were removed in order for asbestos surrounding the boilers to be removed and abated.

Members of the Allagash Alliance worked to right and stabilize Eagle Lake and West Branch Railroad Locomotive Number 1 and its Tender. Built in June 1897 at Schenectady Locomotive Works (4-6-0 stamped #4552), it was originally a steam locomotive but later converted to burn crude oil to eliminate the forest fire threat caused by cinders. Number 1 was purchased by Great Northern in 1926 and used to haul pulpwood in the Allagash area from 1927-1933.

ELWB Locomotive Number 2, and its tender, were built in December 1901 at Brooks Locomotive Works (2-8-0 stamped 4062). Number 2 was also used as a steam locomotive and later converted to burn crude oil. It was purchased by Great Northern in 1928 and used as the main engine for hauling pulp cars from 1928-1933. When the railroad stopped operating, both locomotives were relatively obsolete and not worth the cost of transporting them back out of the Allagash area. Instead, they were stored inside a shed at the Eagle Lake facility where they remain today.”

The fact they are so well intact is a benefit of their location. Far from the “accessible” world of human society they sit in the quiet of the vast northern portion of Maine. If these trains were say, in Augusta, they would have been picked apart by prying hands of vandals and souvenir seekers. The earth always reclaims things that are left behind as well as preserving them.

Any trip to see the trains must be well planned out and all must be accounted for including food, gas and survival gear. From Portland the trip can take two days or mor, depending on time of stay and conditions. Keep a head on your shoulders and you should be fine.

Credit on the photos to Rich Pace, RoadRunner and JonWillard all from, the site which posts its images on Google Earth and Google Maps. Thank you.


12 Responses

  1. Im going to go there someday!..Mark my words.

    • been there…. 1973…. ice fishin into Eagle Lake…. came off Chamberlain Lake towards Eagle…. came around the corner…. and whoops!…. guess what i saw?…. that truly is God’s country….. and did we catch some beautiful fish too!

  2. mOfRsz Thanks for good post

  3. Nice work on your article. I’m an Engineer on the railroad over in Rush City. I enjoy history and like your research.

  4. that was a nice read

  5. Does anyone have the location of the trailhead or a GPS location of where the trains and other parts of this site are at? I’m from Maine and travel there a few times a year and this would be an interesting site to check out!

  6. Hiked in saw the trains ! Wicked cool ! Tomma 8 13 11

  7. northern mainer
    never been there but have heard alot about it my neohews all have been the plenty of times need to go check it out and camp a cuple of night while there

  8. I visited the trains as a kid in the mid-1960s when the engines were still in the train shed. Chamberlain Lake was a winter wonderland and the trains were an annual stop. We climbed on and around them in the darkness. After the shed was burned down, it was sad to see the engines out in the weather. My father changed the tone a bit by stuffing the firebox opening in the front of one of the engines with evergreen boughs and lighting them with a railroad flare, thus producing smoke billowing from the smokestack for a group photo. My last visit was in spring 1992 during a canoe trip down the Allagash with my father and brothers. This area hold special memories.

  9. […] The Trains Of Eagle Lake And The Allagash Wilderness | Looking Through The Lens Head over to NE Carry then up to Chesuncook Lake house, fuel up and ask for directions Need good map with the new snow all the tracks will be covered Great ride We went there last week from Libby's Gonna go from the lake house Thursday __________________ BATTEN ELECTRIC Your complete solution to a wired world […]

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s

%d bloggers like this: